9032785 ELS100-24TXM User Interface 35
Spanning Tree Configuration Menu
The Spanning Tree Configuration Menu allows you to view and modify
Spanning Tree parameters. Select
b
from the Switch Configuration Menu
to view the Spanning Tree Configuration Menu. A letter identifies
selections that can be modified. All other fields are read-only. Figure 3-8
shows the Spanning Tree Configuration Menu and the accompanying
table describes the Spanning Tree Configuration Menu.
Figure 3-8. Spanning Tree Configuration Menu
continued on next page
SPANNING TREE CONFIGURATION Access Control: READ/WRITE
Bridge ID 32768-000000000000
Designated Root
Root Path Cost 0
Root Port NO PORT
Topology Change Count 0
a. Spanning Tree Protocol Enable No
b. Port Configuration Menu
c. Hello Time (seconds) 2
d. Forward Delay (seconds) 15
e. Max Age (seconds) 20
f. Bridge Priority 32768
x. Previous Menu
Enter Selection:
Field Description
Brid
e ID A unique identifier for the brid
e (switch) in the Span-
nin
Tree. The ID is a combination of the brid
e priority
and port 1 MAC address.
Desi
nated Root The brid
e in the Spannin
Tree with the lowest Brid
e
ID value, desi
nated as the root brid
e.
Root Path Cost The cost of the path to the root brid
e.
Root Port The port identifier of the port that offers the lowest cost
path to the root brid
e.
Topolo
y Chan
e Count The count of the number of times the network topolo
y
has chan
ed from a Spannin
Tree reconfi
uration.
