Chapter 3: Installation
3-16 ESX-1320/ESX-1380 Installation Guide
3. With the mounting brackets installed, position the ESX between the
vertical frame members of the 19-inch rack and fasten it securely with
four user-supplied mounting screws as shown in Figure 3-12.
Figure 3-12 Installing the ESX in the Rack
Proceed to Section 3.7.3 for instructions to connect the ESX to a power
source.
3.7.3 Connecting to the Power Source
Connect power to the ESX as follows:
1. Plug the female end of the supplied power cord into the 3-prong
receptacle on the back panel of the ESX.
2. Plug the power cord into a grounded wall outlet. The POWER LED
turns ON (green) and the CPU LED turns ON (green) briefly.
NOTE
The ESX has a universal power supply. This allows connection
of the ESX to power sources ranging from 100 to 125 Vac, or
200 to 250 Vac, 50/60 Hz.
NOTE
While booting, the ESX displays boot diagnostics and
messages on Local Management, and the LCD also displays
messages.
Screws (4)
19-Inch Rack
7X 8X 9X 10X 11X 12X1X 2X 3X 4X 5X 6X
ESX-1320
COM 2 COM 1
DISPLAYRESET
MULTI PORT ETHERNET SWITCH
WITH
FDSE
™
AND
LANVIEW
®
PWR
CPU
RECEIVE
TRANSMIT
PORT
123456789101112
1574-05
