A SERVICE OF

logo

Page 5SKU 96147
For technical questions, please call 1-800-444-3353.
Hose Connector
(1.1)
Release
Valve (18)
Handle (5,6) in
Handle Sleeve (7)
Extension
Screw (44)
Pump
Elbow (3)
Air Pump (4)
Air Hose (2)
Hose Band
(1.16)
Lever (1.13) and
Lock Lever (1.17)
Lowering
Caution: Clear tools from underneath the load before lowering. Keep hands and feet clear.
Before lowering the Jack, the operator must ensure that all bystanders are free and
clear of the load before continuing.
Caution: Avoid rapid descent of the load. Turn the Release Valve slowly.
Release the Lock Lever (1.17) to stop air flow to the Air Motor (4).
Remove air supply hose from the Air Inlet Fitting.
Place the slotted end of the Handle (5, 6) assembly over the Release Valve Screw
(18).
Slowly and carefully lower the load by turning the Release Valve counterclockwise in
extremely small increments using only the Handle assembly (never your hand).
Remove the Jack.
1.
2.
3.
4.
5.
FIGURE A