CY8C24123A
CY8C24223A, CY8C24423A
Document Number: 38-12028 Rev. *I Page 36 of 56
AC Operational Amplifier Specifications
The following tables list the guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ T
A
≤ 85°C, 3.0V to 3.6V and -40°C ≤ T
A
≤ 85°C, or 2.4V to 3.0V and -40°C ≤ T
A
≤ 85°C, respectively. Typical parameters
apply to 5V, 3.3V, and 2.7V at 25°C and are for design guidance only.
Settling times, slew rates, and gain bandwidth are based on the Analog Continuous Time PSoC block.
Power = High and Opamp Bias = High is not supported at 3.3V and 2.7V.
Table 35. 5V AC Operational Amplifier Specifications
Symbol Description Min Typ Max Units
T
ROA
Rising Settling Time from 80% of ΔV to 0.1% of ΔV
(10 pF load, Unity Gain)
Power = Low, Opamp Bias = Low
Power = Medium, Opamp Bias = High
Power = High, Opamp Bias = High
–
–
–
–
–
–
3.9
0.72
0.62
μs
μs
μs
T
SOA
Falling Settling Time from 20% of ΔV to 0.1% of ΔV
(10 pF load, Unity Gain)
Power = Low, Opamp Bias = Low
Power = Medium, Opamp Bias = High
Power = High, Opamp Bias = High
–
–
–
–
–
–
5.9
0.92
0.72
μs
μs
μs
SR
ROA
Rising Slew Rate (20% to 80%) (10 pF load, Unity Gain)
Power = Low, Opamp Bias = Low
Power = Medium, Opamp Bias = High
Power = High, Opamp Bias = High
0.15
1.7
6.5
–
–
–
–
–
–
V/μs
V/μs
V/μs
SR
FOA
Falling Slew Rate (20% to 80%) (10 pF load, Unity Gain)
Power = Low, Opamp Bias = Low
Power = Medium, Opamp Bias = High
Power = High, Opamp Bias = High
0.01
0.5
4.0
–
–
–
–
–
–
V/μs
V/μs
V/μs
BW
OA
Gain Bandwidth Product
Power = Low, Opamp Bias = Low
Power = Medium, Opamp Bias = High
Power = High, Opamp Bias = High
0.75
3.1
5.4
–
–
–
–
–
–
MHz
MHz
MHz
E
NOA
Noise at 1 kHz (Power = Medium, Opamp Bias = High) – 100 – nV/rt-Hz
Table 36. 3.3V AC Operational Amplifier Specifications
Symbol Description Min Typ Max Units
T
ROA
Rising Settling Time from 80% of ΔV to 0.1% of ΔV
(10 pF load, Unity Gain)
Power = Low, Opamp Bias = Low
Power = Medium, Opamp Bias = High
–
–
–
–
3.92
0.72
μs
μs
T
SOA
Falling Settling Time from 20% of ΔV to 0.1% of ΔV
(10 pF load, Unity Gain)
Power = Low, Opamp Bias = Low
Power = Medium, Opamp Bias = High
–
–
–
–
5.41
0.72
μs
μs
SR
ROA
Rising Slew Rate (20% to 80%) (10 pF load, Unity Gain)
Power = Low, Opamp Bias = Low
Power = Medium, Opamp Bias = High
0.31
2.7
–
–
–
–
V/μs
V/μs
SR
FOA
Falling Slew Rate (20% to 80%) (10 pF load, Unity Gain)
Power = Low, Opamp Bias = Low
Power = Medium, Opamp Bias = High
0.24
1.8
–
–
–
–
V/μs
V/μs
BW
OA
Gain Bandwidth Product
Power = Low, Opamp Bias = Low
Power = Medium, Opamp Bias = High
0.67
2.8
–
–
–
–
MHz
MHz
E
NOA
Noise at 1 kHz (Power = Medium, Opamp Bias = High) – 100 – nV/rt-Hz
[+] Feedback
