Network [x] Software Error
[x] is the number of the network connection.
Try one or more of the following:
• Press to clear the message.
• Turn the printer off and then back on to reset the printer.
Out of Paper in Tray [x]
Try one or more of the following:
• Load the specified paper in the tray.
• Press to cancel the current job.
Paper Tray [x] Detected
Try one or more of the following:
• Press to clear the message.
• Use the arrow buttons to select Change Settings, and then select the paper size and paper type of the media loaded.
Press
for each selection.
Paper Tray [x] Removed
Do one or more of the following:
• Insert the specified paper tray into the printer.
• Press to clear the message.
Printer Memory Full
Try one or more of the following:
• Depending on your printer model, touch OK or press to clear the message, and then try printing again.
• From the computer, adjust the printer settings to reduce the quality of the print job, and then try printing again.
Printhead Cannot Move
Try one or more of the following:
• Open the printer to remove any obstructions to the printhead, and then close the printer.
• Press to clear the message.
Troubleshooting 136
