Operation Operation
16
ENGLISH
Direct access of channels
Once all number have been input, press ENTER to
change the channel.
If the next [NUMBER] is not pressed within several seconds, the
channel automatically switches to the channel number that was
input.
3
Press [SEARCH] in the XM mode.
Press [NUMBER] to enter the desired channel.
For example, if you want to access channel 123 (ex.XM123)
press [NUMBER] as shown below.
1
2
Press TUNING to reach the desired channel.
2
Use FUNCTION to select “XM” or press XM RADIO.
1
Press [
FF GG
] to select the category, and press [
DD HH
] to
select the channel within the selected category.
2
Press [
FF GG
] in the XM mode.
• The current category name is displayed.
1
• “LOADING” is displayed while receiving the channel or information.
• “UPDATING” is displayed while updating encryption code.
• When the selected channel is not available, “XM – – –” is displayed.
• Information on the artist name, song title, category and signal level
can be checked using STATUS.
• The XM Satellite Radio channels can be preset in the same way as
AM/FM band.
• In addition to AM/FM band presetting, a total of 56 stations can be
preset.
• “XM” can be selected directly by pressing XM RADIO.
Channel number
Channel name
Channel category
Song title / Artist name
The channel changes continuously when you press and hold
TUNING.
When the artist name and song title are received, they are
displayed.
ENGLISH
Checking the XM signal strength and Radio ID
Use FUNCTION to select “XM” or press XM RADIO.
Press STATUS until “SIGNAL” is displayed.
• The display changes as shown below according to the receiving
condition.
1
2
Adjust the antenna location until “SIGNAL:GOOD”
is displayed.
3
Press STATUS until the XM channel (ex.XM001) is
displayed.
4
Press TUNING to select channel 0 (XM000).
5
ConditionDisplay
NO
GOOD Signal strength is good
MARGINAL Signal strength is marginal
WEAK Signal strength is poor
Loss of the signal
Radio ID
