Operation Operation
20
ENGLISH
Outputting a program source to amplifier, etc.,
in the ZONE2 (or ZONE3) room (ZONE2 or
ZONE3 SELECT mode)
Press
<
ZONE/REC SELECT
>
to select “M-ZONE”.
Use FUNCTION to select the source you want to
output appears on the display.
• The “ ” indicator and the indicator for the selected
source light.
1
2
• The signals of the source selected in the ZONE mode are also
output from the VCR and CD-R/TAPE recording output terminals.
Start playing the source to be output.
For operating instructions, refer to the manuals of the respective
components.
3
About the button names in this explanation
<>
: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Remote control unit operations during multi-
source playback
Use [FUNCTION] to select the input source you wish
to output.
• The “ ” indicator and the indicator for the selected
source light.
The MULTI ZONE source switches directly.
When the MULTI ZONE SOURCE function is set to “FM/AM”,
the preset channel can be selected pressing [CHANNEL].
The volume of the outputs of the different zones can
be adjusted with [VOLUME].
Default volume setting
ZONE2/ZONE3 : – – – dB (Minimum)
The zone volume can be adjusted within the range of –80 to 18
dB, in steps of 0.5 dB.
4
5
Set [MODE SELECTOR 1] to the “B”.
Press [ZONE2 (ZONE3) ON] to turn on the zone power.
To cancel the ZONE2 or ZONE3 mode:
Press [ZONE2 OFF] or [ZONE3 OFF].
1
3
Set [MODE SELECTOR 2] to the “ZONE2” or
“ZONE3”.
2
• When using ZONE2 or ZONE3, it is possible to turn the power for
the MAIN ZONE only on or off by pressing [MAIN ON/OFF].
ENGLISH
