24-port NWay Ethernet Switch User’s Guide
96 Using the Console Interface
the switch will implement the type of VLANs chosen
here.
♦ Management VID This is the VLAN that will be used for
management packets. Make sure the switch port that
the network management station is connected to is a
member of this 802.1Q VLAN (VID). This should be the
first VLAN you create, otherwise, you may not be able to
communicate with the switch.
Configure MAC-Based VLA
To create MAC-based VLANs, simply create the VLAN itself
in the Create/Remove MAC-based VLAN screen, and then
MAC addresses to the VLAN in the Configure a MAC-based
VLAN screen. Afterwards, restart the switch and the VLAN
will be implemented.
Figure 6-25. MAC Base VLAN Configuration menu
Choose Create/Remove a MAC-based VLAN to access the
following screen:
