24-port NWay Ethernet Switch User’s Guide
118 Using the Console Interface
Figure 6-44. Port Packet Error Statistics tabl
Select the desired setting in the Ports field: 1 to 4, 5 to 8, 9
to 12, 13 to 16, 17 to 20, 21-S1P2, or Slot 2 and the desired
increment setting in the Polling Interval field: 2 sec, 5 sec,
15 sec, 30 sec, 1 min, or Suspend.
The statistic counters displayed are defined as follows:
♦ Speed If the link is up, the speed and duplex status will
be displayed; if the link is down “-” will be displayed.
♦ CRC Error The number of frames that fail the CRC
integrity check.
♦ Oversize Frames The number of good frames with
length greater than 1518 bytes and therefore are
greater than the maximum legal length.
♦ Fragments The number of packets less than 64 bytes
with either bad framing or an invalid CRC. These are
normally the result of collisions.
