A SERVICE OF

logo

DES-3550 Fast Ethernet Layer 2 Switch
Figure 7- 32. SNMP Group Table Display
To add a new entry to the Switch's SNMP Group Table, click the Add button in the upper left-hand corner of the SNMP
Group Table page. This will open the SNMP Group Table Configuration page, as shown below.
Figure 7- 33. SNMP Group Table Configuration
The following parameters can set:
Parameter Description
Group Name
Type an alphanumeric string of up to 32 characters. This is used to identify the new
SNMP group of SNMP users.
Read View Name
This name is used to specify the SNMP group created can request SNMP mes-
sages.
Write View Name
Specify a SNMP group name for users that are allowed SNMP write privileges to
the Switch's SNMP agent.
Notify View Name
Specify a SNMP group name for users that can receive SNMP trap messages
generated by the Switch's SNMP agent.
Security Model
SNMPv1 - Specifies that SNMP version 1 will be used.
SNMPv2 - Specifies that SNMP version 2c will be used. The SNMPv2 supports both
centralized and distributed network mana
g
ement strate
g
ies. It includes
138