Design Wash LED Pro™
©Elation Professional, Los Angeles Ca. 25 www.ElationLighting.com
Feedback – This function turns the feedback correction on or off. This function is set
to “ON” as default. This function allows for automatic pan and tilt correction in the
event either one disrupted during normal operation.
Movement Speed – This function changes the speed function of the Pan and Tilt
motors. Use this function when intergrading Design Wash LED Pro
™
into lighting rigs
that included Design Wash 250
™
s and Design Spot 250
™
s. There are 3 different
mode variations;
Speed 1 (Default): Slower than the original Design Spot 250 for smoother, more
precise movements.
Speed 2: Pan and Tilt speeds are identical to the first generation Design Spot
250.
Speed 3: includes a faster Pan speed. Pan speed is 0.5 seconds faster than
original Design Spot 250. Tilt speed will be the same as speed 2.
Mic Sensitivity – This function makes the internal microphone more or less
sensitive to sound. This function only works in conjunction with the sound active
modes. The default setting is 70% and setting range from 0% to 99%.
8.4.2 Service Setting – The adjustments and settings in this section should only be
performed by a technician familiar with the functionality of fixtures of this type. Incorrect
adjustments to these functions may result reduced performance or damage to the
fixture.
Service Password: The correct password must be entered before attempting any
type of calibration or the changing fan voltage.
Fan Voltage: This function will change the fan voltage from either “Low” or “High.”
Low will send normal voltage to the fan, for normal operation. High will send slightly
higher voltage to fans that allows the fans to operate at higher than normal speeds.
This setting should only be used in extreme cases of higher than normal
temperatures. Using the fans in “HIGH” mode will decrease fan life over time. Low is
