A SERVICE OF

logo

Open as PDF
next previous
MA250-EU-EN-V3.2-6/11
7
Capacitance Measurements
WARNING: To avoid electric shock, discharge the capacitor before measuring.
1. Rotate the function switch to the CAP capacitance position.
2. Insert the black test lead banana plug into the negative COM jack.
Insert the red test lead banana plug into the positive
jack.
3. Touch the black test probe tip to one side of the device.
Touch the red test probe tip to the other side of the device.
4. Read the capacitance value in the display.
Type K Temperature Measurements
1. Rotate the function switch to the °F or °C temperature position.
2. Insert the Temperature Probe into the input jacks.
3. Place the temperature probe tip(s) where needed.
4. Read the temperature on the display.
Note: In case of an open input or a temperature overrange, the meter will display
“OL” .