GPS 400 Pilot’s Guide and Reference
190-00140-60 Rev. H
7-10
SECTION 7
NRST PAGES
Once an airspace alert message appears, detailed
information concerning the specific airspace is provided
on the Nearest Airspace Page (Figure 7-21). The Nearest
Airspace Page displays the airspace name, status (‘Ahead’,
‘Ahead < 2nm’, etc., as described on the preceding
page), and a time to entry (if applicable). By selecting
any airspace name listed on the Nearest Airspace Page,
additional details are provided—including controlling
agency, communication frequencies, and floor/ceiling
limits.
Figure 7-21 Nearest Airspace Page
Message
Annunciator
Status and
Time to Entry
Current Page Group
Airspace
Name
Position of
Current Page
within Current
Page Group
Number of Pages in
Current Page Group
Viewing additional details for an airspace
listed on the Nearest Airspace Page:
1) Select the Nearest Airspace Page, using the
steps outlined in Section 7.1 (Figure 7-22).
Figure 7-22 Nearest Airspace Page
2) Press the small right knob to activate the
cursor.
3) Turn the large right knob to scroll through the
list, highlighting the desired airspace (Figure
7-23).
Figure 7-23 Airspace Highlighted
4) Press the ENT Key to display the Airspace
Page for the selected nearby airspace (Figure
7-24).
Figure 7-24 Airspace Page
Status and
Time to Entry
‘Done?’ Field
(Return to
Previous Page)
Airspace Name
and Type
Floor/Ceiling
Limits
5) To return to the Nearest Airspace Page, verify
that ‘Done?’ is highlighted by the flashing
cursor and press the ENT Key.
6) Press the small right knob to remove the
flashing cursor.
