GPS 400 Pilot’s Guide and Reference
190-00140-60 Rev. H
8-15
SECTION 8
AUX PAGES
Inserting a checklist step into an existing
checklist:
1) With the Checklists Page displayed, turn the
large right knob to select the desired checklist
and press the ENT Key.
2) Turn the large right knob to highlight the
existing checklist entry which immediately
follows the new checklist step.
3) Turn the small and large right knobs to enter
the new checklist step. Press the ENT Key
when finished.
Deleting a checklist or all checklists:
1) With the Checklists Page displayed, press the
MENU Key to display an options menu.
2) Turn the large right knob to select ‘delete
checklist’ or ‘delete all checklists’ and press
the ENT Key to remove the checklist or all
checklists from memory.
Copying a checklist:
1) With the Checklists Page displayed and the
desired checklist selected, press the MENU
Key.
2) Turn the large right knob to select ‘Copy
Checklist? and press the ENT Key to copy
the checklist to an empty checklist memory
location.
Sorting the checklists by name or entry:
1) With the Checklists Page displayed, press the
MENU Key to display an options menu.
2) Turn the large right knob to select ‘Sort List
By Entry?’ or ‘Sort List By Name?’ and press
the ENT Key.
Utility Page: Flight Timers
Viewing, using, or resetting the generic
timer:
1) Select ‘Flight Timers’ from the Utility Page
(Figure 8-36), using the steps described at the
beginning of this section (8.3).
Figure 8-36 Flight Timers Highlighted
2) The flashing cursor highlights ‘Start?’. To start
the generic timer, press the ENT Key. Count up
timers typically begin with this step; however,
for count down timers, to enter a count
direction and time before starting the timer,
see the following steps.
3) To change the count direction, turn the large
right knob to highlight the count direction
field (Figure 8-37): ‘Down’ or ‘Up’. Turn the
small right knob to select the desired count
direction. Press the ENT Key when finished.
Figure 8-37 Count Window
