GPSMAP
®
6000/7000 Series Owner’s Manual 37
Navigation
Creating and Saving a Route
This procedure saves the route and all the waypoints in it.
1. From the Home screen, select > > > .
2. Select the starting point of the route:
• Select . For the GPSMAP 6000 series, use the to select a location on the chart. For
the GPSMAP 7000 series, touch a location on the chart.
• Select and select a saved waypoint.
Starting
point
3. Select to mark the starting point of the route.
4. Indicate the location where you want to make the next turn:
• Select . For the GPSMAP 6000 series, use the to select a location on the chart. For
the GPSMAP 7000 series, touch a location on the chart.
• Select and select a saved waypoint.
5. Select .
The chartplotter marks the position of the turn with a waypoint.
6. If you want to add additional turns, repeat steps 4 and 5.
7. Select a destination:
• Select . For the GPSMAP 6000 series, use the to select a location on the chart. For
the GPSMAP 7000 series, touch a location on the chart.
• Select and select a saved waypoint.
