6
INSTALLATION:
1. Turn on your computer.
2. After Windows
®
has loaded; insert the enclosed Driver CD into the CD-ROM drive of your
computer.
3. The setup screen will start automatically. If it does not start automatically, please click
“Start”, then “Run…”, type “D:\Setup.exe” into the dialog box. (NOTE: “D:\” represents the
drive letter assigned to the CD-ROM drive you are using. If D is not the letter assigned to
your CD-ROM drive, please replace D with the appropriate drive letter). Then click “OK”.
4. Select your language, and then click “OK” to continue.
5. Make sure your Webcam is not connected to your computer, and then click “OK” to
continue.
6. At the welcome screen, click “Next” to continue.
7. Click “Next” to start the installation.
For Windows
®
XP Users: Windows
®
may notify you that the software that you are
installing has not passed Windows
®
Logo testing; if this occurs, please click “Continue
Anyway” to continue.
For Windows
®
Vista Users: If the “Windows Security” dialog box appears during the
installation, please click “Install” to continue.
8. After the installation is complete, click “Finish” to close the wizard.
9. Plug the USB connector for your Webcam into an available USB 2.0 port on your computer.
10. Windows
®
will detect your Webcam and start the “Found New Hardware Wizard” for your
Webcam.
NOTE: For Windows
®
2000 users, your computer will automatically install the necessary
drivers. Please proceed to Step 15.
For Windows
®
Vista Users: Select the “Locate and install driver software
(recommended)” option to start the installation, then click “Continue” under the User
Account Control screen. Then please proceed to Step 15.
11. Windows
®
may ask for your permission to connect to the Internet and search for the best
driver; if this occurs, please select “No, not this time” and then click “Next” to continue.
12. Select the option “Install the software automatically (Recommended)”, and then click
“Next” to continue.
13. Windows
®
may notify you that the software that you are installing has not passed Windows
®
Logo testing; if this occurs, please click “Continue Anyway” to continue.
14. After the installation is complete, click “Finish”.
15. Restart your computer.
16. Once your computer has restarted and Windows
®
has loaded, your Webcam is ready to be
used.
LED INDICATORS:
There is an LED indicator on your Webcam, which indicates the current status of your Webcam.
LED Indicator Status
Description
Off The Webcam lens is disabled; or, inactive.
No connection.
On The Webcam is connected and ready to be used.
