-14-
G0572 Hanging Air Filter with Remote
Dust System
When used in conjunction with a dust collector
system, the Model G0572 filter efficiently removes
most fine wood particles in the air that many dust
collectors cannot.
USE the correct dust collection system in
your shop. This air filter unit is not a dust
collection system and CANNOT be modi
-
fied as such. Ignoring this warning can
result in short and long-term respiratory
illness.
For additional information on the correct dust
collection system, additions, or modifications;
contact Grizzly for a copy of the Dust Collection
Basics handbook, Model G2525, and available
accessories.
It is very important that the hanging air filter
be supported properly. Please use these guide
-
lines when preparing to mount the unit:
• For the sake of clarity, the face where
the mounting eye bolts and flush mount
flange brackets attach will be called the top
throughout the manual. The hanging air filter
can be placed on its side, top or at an angle
but it can only be secured by mounting eye
bolts and flush mount flange brackets on its
top.
• Make sure that an electrical outlet with a
properly grounded receptacle is available at
the location you choose.
• The hanging air filter must be supported by
joists or studs capable of supporting at least
100 lbs when mounting the unit with eye bolts
or flush mount flange brackets. DO NOT
attach the hanging air filter to sheet rock,
press board or paneling. These materials
cannot support the filter, and it may fall.
• Avoid hitting your head on the hanging air
filter. Make sure there is enough clearance
between the unit and the ground, especially
important in a basement. If possible, position
the air filter in an area that has little foot
traffic, but still offers easy access to the
switch and filters.
Mounting
Preparation
