14
Always return the cylinder with some residual pressure to
prevent ingress of ambient air.
● Depressurize OXYTRON
®
(6) by inhaling several times
through the oxygen nasal cannula (7), whereby the
contents gauge (4) drops to "0".
● Take off the oxygen nasal cannula (7).
● Turn the switch (10) to the "BATT" position. Read the
voltage indication (13) and change the battery if necessary
(see point 9.2 "Changing the battery").
● Turn the switch (10) to the "0" position.
Remark:
Leaking batteries may destroy the OXYTRON
®
, so hold them
separate if not in use for longer time.
7 Cleaning and Disinfection
Clean the instrument from time to time with a damp cloth. After
use, clean the nose olives of the oxygen nasal cannula
internally and externally by wiping with a commercial
disinfectant solution (following the instructions of use).
Never place the hose system in a disinfectant solution, since
even rinsing and drying do not guarantee the removal of all
traces of disinfectant from the hoses. The oxygen nasal
cannula must be exchanged when changing to another
patient. The oxygen nasal cannula and the spiral hose are
disposable items which have to be replaced from time to time.
This is done as follows:
● Remove the bayonet coupling of the oxygen nasal cannula
and the spiral hose by turning it anticlockwise, and take it
away (see Fig. 14 and 15).
● Fit the new parts and secure by turning clockwise (see Fig.
14 and 15).
7
Carrying bag for OXYTRON
®
2 Mobile 2.0
with shoulder strap WM 6105
Oxygen cylinder 10 l x 200 bar WM 1825
Cylinder jacket for 10-l-oxygen cylinder WM 1850
PONY carriage with 5 feet WM 1700
Connection hose, length 20 m WM 6051
4 Accessories and Spare Parts
4.1 Accessories
Caddy WM 6115
Handwheel for cylinder valve (10 l) WM 2875
Note
OXYTRON
2 can be fitted to each commercial oxygen cylinder
with medical oxygen (blue with white shoulder), if used together
with the two stage pressure reducer supplied with the instrument.
4.2 Spare parts
Oxygen cylinder 0.8 l WM 1818
Oxygen cylinder 2.0 l WM 1822
OXYTRON
pressure reducer WM 1102
Connecting nozzle and nut WM 6110
OXYTRON
2 electronic oxygen conserver WM 7001
Carrying bag for OXYTRON
2 Mobile 0.8
with shoulder strap WM 6125
Carrying bag for OXYTRON
2 Mobile 2.0
with shoulder strap WM 6105
Shoulder strap for carrying bags WM 6129
Oxygen nasal cannula WM 7016
Spiral hose for connection
pressure reducer/OXYTRON
2 WM 7017
Hose for connection
pressure reducer/OXYTRON
2 WM 7018
Stand-by bag OXYTRON
2 WM 7004
Carrying strap for stand-by bag OXYTRON
2 WM 7005
Battery 1.5 V WM 5184
Set of spare sealings WM 1148
Connection hose, length 20 m
for pressure reducer/OXYTRON
®
2 WM 6051
Screw nozzle for connection hose WM 6118
OXYTRON
2 Accessory-set connecting nozzle
to fit commercial oxygen nasal cannula WM 15135
PONY carriage with 5 feet WM 1700
Cylinder jacket for 10-l-oxygen cylinder WM 1850
Oxygen cylinder 10 l WM 1825
B
A
TT-TE
ST
S
E
L
E
C
T
O
R
fitting
loosen
A
L
A
R
M
B
A
T
T
-
T
E
S
T
I
/
B
A
T
T
S
E
L
E
C
T
O
R
W
EIN
M
AN
N
H
AM
BU
R
G
O
X
Y
T
R
O
N
2
fitting
loosen
Fig. 15
Fig. 14
