Havis-Shields KK-K9-C13-K-32 Manual

next previous

KK-K9-C13-K-32_INST_11-08

3. INSTALL MOUNTING LEGS:

• Using ¼-20 x ¾” Carriage bolts attach mounting legs to hold down plates.

• Loosely attach hold down plates to floor using existing seat mounting studs and nuts used

to hold down seats.

Note: Use one OEM nut as a spacer under the plate.

4. SLIDE IN K9 MAIN HOUSING:

• Slide in main housing

• Mark & drill 5/16” holes in K9 unit floor where mounting legs and floor come together.

• Mount legs to housing loosely using ¼-20 x ¾” Carriage bolts and serrated nuts.

5. INSTALL TUNNELS AND FILLERS:

• Loosely attach side tunnels to main housing using ¼-20 x ¾” or ½”Carriage bolts (double

or triple skin) and ¼-20 serrated nuts.

• Place cover step in tunnels and mount using #12 x ¾” Stainless Sheet Metal screws.

Rear housing extension should

be attached at this time