A SERVICE OF

logo

Open as PDF
next previous
50 HP ProLiant DL560 Server Maintenance and Service Guide
4. Disconnect and remove the SCSI cable.
To replace the component, reverse the removal procedure.
SCSI Backplane
To remove the component:
1. Power down the server ("Powering Down the Server" on page 16
).
2. Extend or remove the server from the rack ("Extending the Server from the
Rack" on page 17
, "Removing the Server from the Rack" on page 18).
3. Remove the access panel ("Removing the Access Panel" on page 18
).
4. Remove all hot-plug SCSI hard drives ("Hot-Plug SCSI Hard Drive" on page
19
).
5. Remove the tape drive, if installed ("Universal Hot-Plug Tape Drive" on
page 23
).