Next Available Options:
■ interface -- Enable/disable tracking of logical ports for VR(p. 239)
■ vlan -- Enable/disable tracking of VLANs for VR(p. 282)
transit-delay
■ interface vlan VLAN-ID ip ospf transit-delay < 1 to 3600 >
Set transit delay in seconds; the default is 1.
Range: < 1 to 3600 >
■ interface vlan VLAN-ID ip ospf IP-ADDR transit-delay < 1 to 3600 >
Set transit delay in seconds; the default is 1.
Range: < 1 to 3600 >
■ interface vlan VLAN-ID ip ospf all transit-delay < 1 to 3600 >
Set transit delay in seconds; the default is 1.
Range: < 1 to 3600 >
trust
■ [no] interface [ETHERNET] PORT-LIST dhcp-snooping trust
Usage: [no] dhcp-snooping trust PORT-LIST
Description: Congure trusted interfaces. Only server packets received
on trusted interfaces will be forwarded. When 'no' is
specied the interfaces are marked as untrusted.
The default port state is untrusted.
Parameters:
o PORT-LIST - Port list on which to congure trust status.
■ [no] interface [ETHERNET] PORT-LIST arp-protect trust
ttl-threshold
■ interface vlan VLAN-ID ip pim-dense ttl-threshold < 0 to 255 >
Usage: ip pim-dense ttl-threshold <0-255>
Description: Set the Time To Live in a PIM-DM State Refresh message at
which it is not forwarded on this interface. Default is 0.
Range: < 0 to 255 >
■ interface vlan VLAN-ID ip mroute ttl-threshold < 0 to 255 >
Usage: ip mroute ttl-threshold <0-255>
Description: Set the multicast datagram TTL threshold for the interface.
Any IP multicast datagrams with a TTL less than this threshold
will not be forwarded out the interface. The default value of 0
means all multicast packets are forwarded out the interface.
Range: < 0 to 255 >
279© 2009 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide
