show
OVERVIEW
Category:
operatorPrimary context:
Related Commands
Usage: show ...
Description: Display switch operation information.
The 'show' must be followed by a command.
Use 'show ?' for the list of all possible command.
COMMAND STRUCTURE
■ show access-list -- Show Access Control List information (p. 527)
■ acl-name -- Display detailed information on specified ACL. (ASCII-STR) (p. 528)
■ config -- Show all configured ACL's on the switch using the CLI syntax used to create them.
(p. 540)
■ config -- Show all configured ACL's on the switch using the CLI syntax used to create them.
(p. 540)
■ ports -- Show ACLs applied to the specified ports. ([ethernet] PORT-LIST) (p. 580)
■ radius -- Display ACLs applied via RADIUS. ([ethernet] PORT-LIST) (p. 583)
■ resources -- Display ACL Rules/Masks availability. (p. 585)
■ vlan -- Show ACLs applied to the specified VLAN. (VLAN-ID) (p. 603)
■ show accounting -- Show Accounting configuration parameters (p. 528)
■ sessions -- Show accounting data for all active sessions (p. 590)
■ show alias -- Show configured alias commands (p. 529)
■ show arp -- Show the IP ARP translation table (p. 530)
■ vlan -- Specify VLAN for which to show ARP entries. (VLAN-ID) (p. 603)
■ show arp-protect -- Display Dynamic ARP Protection information (p. 530)
■ statistics -- (VLAN-ID-RANGE) (p. 594)
■ show authentication -- Show Authentication configuration parameters (p. 531)
■ show authorization -- Show Authorization configuration parameters (p. 531)
■ show autorun -- Show Autorun configuration status. (p. 533)
■ show bandwidth -- Show queue percentages for outbound guaranteed minimum bandwidth (p.
533)
■ output -- Show outbound guaranteed minimum bandwidth. (p. 575)
■ port-list -- Specify ports for which information will be shown. ([ethernet] PORT-LIST) (p.
578)
■ show banner -- show the configured banner text (p. 533)
■ motd -- show the configured banner text (p. 571)
■ show boot-history -- Display the system boot log (p. 534)
■ show cdp -- Show CDP configuration and neighbors discovered (p. 537)
■ neighbors -- Show CDP neighbors. See 'show cdp help' for details. (p. 573)
■ detail -- Show neighbor information field-per-line instead of shortened table format. (p. 546)
■ neighbors-port -- Show CDP neighbors on specified port only. ([ethernet] PORT-NUM) (p.
574)
■ show class -- Show class config. (p. 537)
■ ipv4 -- Enter ipv4 class. (ASCII-STR) (p. 562)
■ ipv6 -- Enter ipv6 class. (ASCII-STR) (p. 562)
511© 2009 Hewlett-Packard Development Company, L.P.
