1-7
D Class System Installation
4. Connect Remote Management Card and Serial Data Cable for the
Optional UPS
4. Connect Remote Management Card and Serial
Data Cable for the Optional UPS
The Remote Management card (also called the Access Port or AP card) is optional
on Model D2xx servers, and standard on Model D3xx servers. The Remote
Management card is located in different slots depending on which model of D Class
server you have. Also, on Model D2xx servers, the UPS data cable connection will
vary depending on whether the optional Remote Management card is present.
Model D2xx 1. If you have a Remote Management card, connect your Line Access Module
(LAM) for connecting to the phone line, to the Modem/LAM connector on the
Remote Management card.
2. If you also have a UPS, connect the data cable from the UPS Port on the UPS to
the UPS connector on the Remote Management card.
3. If you do not have a Remote Management card, connect the UPS data cable from
the UPS Port on the UPS to the connector on the server labeled Serial 2/UPS.
