1-15
D Class System Installation
10. Contacting Hewlett-Packard
10. Contacting Hewlett-Packard
If you need to contact Hewlett-Packard for assistance or additional information, you
may be asked for the system model number and serial number. That information is
located on the system label, on the back of the removable media access door.
Reference Documents
Refer to the following documents for additional information on using your HP 9000
D Class server:
1. Installation guide that shipped with your console or graphics monitor -
Explains how to connect cables, operate, and place your console or monitor.
2. Operator’s Guide - Introduces your server’s features, and explains how to use
and maintain storage and input/output devices, and solve simple problems.
3. System Administration Tasks manual - Describes how to configure and
maintain your system software.
4. Configuring HP-UX for Peripherals - Explains how to configure your server
to recognize add-on peripherals.
5. I/O Card Upgrade Guide - Explains how to install add-on I/O cards.
6. Internal Peripheral Upgrade Guide - Explains how to install add-on internal
peripherals, such as disks, tape drives, and CD-ROM drives.
7. System Memory Upgrade Guide - Explains how to install add-on memory
modules.
8. System Upgrade Guide - Explains how to add additional processors, or replace
the existing processor with an upgraded processor.
9. System I/O Expansion Guide - Explains how to expand the I/O capabilities of
the D Class server.
10. HP EISA MUX Cabling, Diagnostics and Troubleshooting Guide - Explains
how to connect and troubleshoot the EISA MUX card.
