Ch 3: Error Information
Hitachi VisionBase 8880R 53
3: Error Information
POST Error
There are several error messages you may encounter during POST (Power on Self Test) while the system is booting.
See below for details regarding these messages.
Code 7 Seg.
Port 80
Error Message Root parts Root cause
0200 00 Failure Fixed Disk Hard Disk Not correctly setup
0210 10 Stuck Key Keyboard Not functional H/W
0211 11 Keyboard Error Keyboard
0213 13 Keyboard locked—Unlock key switch Security key
0232 32 Extended RAM Failed at address line: xx Memory
0236 36 Disabled Memory Bank Address: xx Memory
0239 39 Extended RAM Failed at offset: xxxxxxxx Memory
0250 50 System battery is dead—Replace and run SETUP Battery
0251 51 System CMOS checksum bad—Default
configuration used
CMOS configuration
0260 60 System timer error Timer
0270 70 Real time clock error Real time clock
0271 71 Check date and time setting BIOS setup
02B0 B0 Diskette Drive A error
02B1 B1 Diskette Drive B error
02B2 B2 Incorrect Drive A type—run SETUP BIOS setup
02B3 B3 Incorrect Drive B type—run SETUP BIOS setup
02F1 F1 CPU ID: xx Failed BIST CPU xx
02F3 F3 CPU ID: xx Failed CPU xx
02F8 F8 CPU ID: xx not Found CPU xx
0401 01 Invalid System Configuration Data—run
configuration utility
BIOS setup
0404 04 Resource Conflict—PnP ISA (Device name) BIOS setup
0408 08 System Configuration Data Read Error BIOS setup
0409 09 System Configuration Data Write Error BIOS setup
0504 04 Resource Conflict—PCI (controller Name) BIOS setup
