Preparing the Camera for Bluetooth connection
10
Enter the pass key on the camcorder.
3
When using BlackBerry/Touch Pro/Touch Diamond•
Enter a 4 digit number you like ( “0000”, for example).
Enter the passkey for the device to register.
3-1
Tap [SET] after entering all digits.
3-2
After entering it, the camcorder waits for authentication of the
smartphone.
When using HD2•
Entering the pass key is not required. Wait until the message
“REGISTERED” appears on the “DEVICE REGISTRATION” screen.
Enter the pass key on the smartphone.
4
When using BlackBerry/Touch Pro/Touch Diamond•
Enter the same pass key you entered in Step 3.
Pairing is finished.
When using HD2•
If you use HD2, entering the pass key is not required. Tap [Yes] when the
message [Allow this pairing?] appears.
