36
<Recorder Part> Basics
Configuring Settings of Cameras
Connected (continued)
8 Specify the type and storage location of
recording data to be stored in each drive
● This unit stores images received from cameras in a
predefined folder first (recording), then transfers and
saves (archives) the recording data to another location.
Specify a drive and storage folder location (path) for
each.
Configure the following items in order.
● Be sure to specify both a recording path and an archive
path; otherwise, an error occurs and you cannot continue
to the next step.
9 Click [Next]
The data location setting screen for each camera
appears.
10 Specify the data storage location and retention
time for each camera
● Each drive cannot be used for anything other than that
specified for “Purpose” in step 8.
● Select the [Apply Template] check box and click [Apply]
to apply the settings selected in [Template - >] in the
upper part to all selected cameras.
Configuring Basic
Monitoring System
Settings (continued)
Item Description
Purpose For specifying the usage of each
drive.
● Recording and Archiving: Select
this check box to use the drive for
both recording and archiving.
● Recording: Select this check box
to use the drive only for recording.
● Archiving: Select this check box to
use the drive only for archiving.
Recording Path For specifying the location of
recording data storage. This item is
available when [Recording] or
[Recording and Archiving] is selected
in [Purpose].
Archiving Path For specifying the location of archive
storage. This item is available when
[Recording and Archiving] or
[Archiving] is selected in [Purpose].
● By default ([Using dynamic path]),
a path is automatically
determined. To save data in any
other location, deselect the
[Dynamic path selection for
archives (recommended)] check
box to specify a storage location.
