© Leica TPS-System 1000 Programs-2.3.1en 187
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
RO
HghtOffset : Height displacement of the point
measured in relation to the centre line.
(The amount of the vertical
displacement is also taken into
account.)
Hght. Shift : All heights in the alignment are
changed by this amount. The value
can only be changed in the dialog
"CONFIGURATION".
ChaingeIncr : The chainage difference when setting
out. The chainage is automatically
incremented by this amount.
Re-calls the function "X-SECTION CHECK".
See section "Chainage and centre-line offset".
See section "Chainage and centre-line offset".
The result of the road station and offset is stored.
See section "Chainage and centre-line offset".
See section "Chainage and centre-line offset".
