© Leica TPS-System 1000 Programs-2.3.1en 73
IV
EL
AH
OH
BS
SM
SO
∆ ∆
∆ ∆
∆ Height : Difference in height between the
measured reflector point and the
stakeout point. Positive in sign if
stakeout point is higher than the
reflector position.
Elevation : Elevation of the measured reflector
point.
Simultaneously measure and record data on the active
recording device.
Measure a distance.
Record the measurement on the active recording device.
Enter target data as described in chapter "Measure &
Record" of "System" - user manual.
Re-position the telescope on the target. Note, this
function is only available for motorized theodolites.
Change stakeout method. For more information refer to
chapter "Select Stakeout Method".
Generate a plot of the stakeout data. For more
information refer to chapter "Plot".
Exit the program.
Acquire the next point to stake.
