113Operations - TN3270E SETUP: MISC SETTINGS > Format Ctrl Sup (IDB Option 177)
Format Ctrl Sup
(IDB Option 177)
This SCS Options > MISC Settings option defines the suppression
of control codes after Power On.
Option Value IDB Value Comments
Normal * 0 Standard handling of control codes
after Power On. It can be disabled
with the <CSC>+M command.
No AutoNL 1 Is disabled after Power On in Host
direct print and Local Copy print. It
can be enabled with the <CSC>-M
command. All host generated codes
are still sent.
No AutoNL’ 2 Is diabled after Power On in Host
direct print. It can be enabled with
the <CSC>-M command. All host
generated codes are still sent.
No Codes 3 CR, LF, NL and FF codes from the
host are suppressed and the auto-
NL function is disabled. It can be
enabled with the <CSC>-M
command.
Note: Because control codes are
suppressed, horizontal/vertical tab and
other commands which depend on correct
page format will not work correctly.
