7
Mount the IM with the IM Mounting Screws provided, on a vertical 5.
surface, with the cables exiting downwards
Connect the IM Power Cable to the vessel’s power (8 to 16 VDC 6.
source)
Connect the IM Network Cable directly to the Chartplotter or a 7.
Navico Expansion Port (NEP), if other network devices are being
used with the LWX-1.
LWX-1 Status Indicators
The LWX-1 status indicators are the two LEDs on the Interface Module. The IM in-
dicators are to be used to obtain connectivity with the end-user device, where more
detailed problem diagnosis is available.
Power LED indicates LWX-1 Power:
LED OFF 1.
— No power to the Interface Module
LED ON (solid green) 2.
— Power to Interface Module.
Status LED indicates LWX-1 Status:
LED OFF1.
— Interface Module is not powered on
— Antenna Receiver is disconnected
— Antenna Receiver has malfunctioned and is inaccessible
LED ON (solid green) 2.
— Antenna Receiver is functioning correctly and providing SIRIUS Data
and SIRIUS Audio (at least preview-level Audio and Data)
