A SERVICE OF

logo

Open as PDF
next previous
User Guide 26ProFire 610
Scenario 1: ProFire 610 as Clock Master
By selecting “internal” as the sync source in the Control Panel, you designate ProFire 610 as the clock
master. You will then need to select “external” (or “slave” on certain devices) mode on your digitally connected
device(s). This is usually an internal menu setting on the external device.
In Figure 1 below, a DAT machine is connected to the coaxial S/PDIF I/O. ProFire 610 is selected as the
clock master, and the DAT machine’s synchronization source is set to “external” (or “slave”).
DAT
(Slave)
ProFire 610
(Master)