- 46 -
Setting Brightness
As you enter the picture menu, Brightness
will be the first item.
Press
button to increase brightness.
Press
button to decrease brightness.
Setting Contrast
Using or button select Contrast.
Press
button to increase contrast level.
Press
button to decrease contrast level.
Setting Colour
Using or button select Colour.
Press
button to increase colour level.
Press
button to decrease colour level.
Setting Sharpness
Using
or button select Sharpness.
Press
button to increase peaking level.
Press
button to decrease peaking level.
Setting Picture Mode:
Using
or button select Picture
Mode.
Press or button to set Picture Mode.
Picture Mode can be set to Auto, 4:3 or 16:9.
Setting Noise Reduction
Using or button select Noise Re-
duction.
Press or button to select Noise Re-
duction level Off or Minimum or Me-
dium or Maximum then select store and
press
or button to save your set-
ting.
Note 1:
At low signal level, the changings on the Noise Reduc-
tion function are not effective when there is menu on the
screen. If the menu is removed, the effect of this func-
tion is seen. At normal broadcasting, Noise Reduction
changings are effective at once.
Note 2:
At moving pictures, while Noise Reduction is at maxi-
mum level, some picture distortions may occur. If Noise
Reduction is set to medium or minimum, the picture will
improve.
