- 53 -
Volume Bar
It is displayed in the lower middle of the
screen. When a volume command is re-
ceived (pressing
+ or - by Re-
mote Control or Control panel at the top of
the TV) and no menu is active, it stays on the
screen for 3 seconds, after the last volume
command or until another command is re-
ceived in between.
AV Modes
By pressing the AV button you can switch
your TV to AV modes (except being in Tele-
text). Pressing this button will consecutively
switch the TV in one of the optional AV
modes: AV-1, AV-2, AV-3, S-VIDEO, PC.
In order to quit the AV mode press the TV,
digit buttons or P- or P+ .
Signal Out Of Range
When the PC input signal is not supported
by LCD-TFT TV, a message is displayed like
Signal out of range and screen is blanked.
PC MODE
Installation
Power off both Computer and Display before
making any connections.
The monitor comes with a 15-pin PC cable.
Connect end of the signal cable to the 15-
pin connector on the rear of the Computer.
Tighten the screws of the Display cable until
the connectors are fastened securely (fin-
ger-tighten only).
If you are using Windows operating system
running on a PC with a Microsoft Plug & Play
compatible video card, your system will se-
lect the appropriate timing for your monitor.
Switching from TV to PC
Press before (hold pressed) and then
SHIFT button together to swich directly PC
mode.
Main Menu in PC mode:
Enter the main menu by pressing the
MENU button on the remote control.
Sound Menu
In the main menu select Sound using
or
button then enter the Sound menu
pressing
, or MODE buttons.
The items in this menu are described at
Sound menu starting page 43.
Picture Menu
In the Main menu, select Picture using
or
button, then enter the Picture menu
pressing
, or MODE buttons.
All adjustment in this menu except Picture
Mode is identical to adjustment defined TV
picture menu starting on page 45. Picture
