Showroom program
Demo mode for showrooms only!
The commercial dishwasher is
equipped with various demo programs
for showroom use.
–
Demo with sound:
This program activates the pumps to
demonstrate the sound of the
dishwasher washing (without water).
–
Demo AutoOpen:
The door will open automatically.
To switch Demo mode on
^ Select the desired option.
^ Select
On and press the centre
button to confirm.
^ Close the door.
The Demo begins.
To switch Demo mode off
Demo mode ends automatically after
one cycle.
Factory default
If you have changed any settings from
the factory default, you can reset them
back to the factory default settings. An
activated external dispensing module
and its respective amount of detergent
or dosage concentration will not be
reset.
^
Select
Reset to default and press
the centre button to confirm.
To close the Settings menu
You can close the Settings menu with
Close.
^ Select
Close and press the centre
button to confirm.
The last selected program is displayed
briefly and the respective indicator light
comes on.
After a short while, the estimated
program runtime is displayed.
Settings menu
82
