DS2100 User's Manual (Preliminary) SECTION 3: WIRING AND INSTALLATION
PAGE 3-72
3.14.5.1 RS232
2
3
5
2
3
5
Rx
Tx
Gnd
Rx
Tx
PC
DS2100
- Fixed connector: 9 pin, female Sub-D connector
-
Mating connector, 9 pin male Sub-D
-
Wiring: cable. 28-18AWG (0.14-0.82mm
2
)
Pos.
Name
Function PC Signal
J1.1 - connected to pin 4 DCD input
J1.2 TxD Transmit Data RxD input
J1.3 RxD Receive Data TxD output
J1.4 - connected to pin 1 and 6 DTR output
J1.5 Gnd Gnd Gnd
J1.6 - connected to pin 4 DSR input
J1.7 - connected to pin 8 RTS output
J1.8 - connected to pin 7 CTS input
J1.9 - unused RI input
3.14.5.2 Digital Inputs
-
Fixed connector: 9 pins, male connector
-
Mating connector, 9 pins spring cage, female, supplied with the drive. Phoenix Contact (Part # FK-MC 0.5/9-ST-
2.5)
-
Wiring: cable. 28-20AWG (0.14-0.5mm
2
)
-
Wire stripping: 8 mm
Pos.
Name
Function
J2A.1 I1 Digital Input # 1 Drive Enable
J2A.2 I2 Digital Input # 2 User Configurable
J2A.3 I3 Digital Input # 3 User Configurable
J2A.4 I4 Digital Input # 4 User Configurable
J2A.5 I5 Digital Input # 5 User Configurable
J2A.6 I6 Digital Input # 6 User Configurable
J2A.7 I7 Digital Input # 7 User Configurable
J2A.8 I8 Digital Input # 8 User Configurable
J2A.9 RET Digital Input Ground
3.14.5.3 Digital Outputs
-
Fixed connector: 5 pins, male connector
-
Mating connector, 5 pins spring cage, female, supplied with the drive. Phoenix Contact (Part # FK-MC 0.5/5-ST-
2.5)
-
Wiring: cable. 28-20AWG (0.14-0.5mm
2
)
-
Wire stripping: 8 mm
Pos.
Name
Function
J2B.1 Ext 24V DC +24V Digital Output Supply
J2B.2 O1 Digital Output #1 User Configurable
J2B.3 O2 Digital Output #2 User Configurable
J2B.4 O3 Digital Output #3 User Configurable
J2B.5 Ext 24V Ret Digital Output Return
