MSR120 Programmer’s Manual UDN PM010, Rev. 1.1
Table of Contents 2003/1/21
Table 5-19. Data Block Channel B, Tk2_______________________________________________ 5
K2C type start end (4Bh 32h 43h type start end) _______________________________________ 6
－ Set Transmitting Data Block, Channel C of Track 2 __________________________________ 6
Table 5-20. Data Block Channel C, Tk2_______________________________________________ 6
K3A type start end (4Bh 33h 41h type start end) _______________________________________ 6
－ Set Transmitting Data Block, Channel A of Track 3 __________________________________ 6
Table 5-21. Data Block Channel A, Tk3_______________________________________________ 6
K3B type start end (4Bh 33h 42h type start end) _______________________________________ 6
－ Set Transmitting Data Block, Channel B of Track 3 __________________________________ 6
Table 5-22. Data Block Channel B, Tk3_______________________________________________ 6
K3C type start end (4Bh 33h 43h type start end) _______________________________________ 6
－ Set Transmitting Data Block, Channel C of Track 3 __________________________________ 6
Table 5-23. Data Block Channel C, Tk3_______________________________________________ 6
DF0 (44h 46h 00h) － Default Setting________________________________________________ 6
RE0 (52h 45h 00h) － Read EEPROM Data ___________________________________________ 7
Byte1 and 2 in EEPROM are 00h, 13h separately. They are identical characters. __________________ 7
Byte 3 in EEPROM__________________________________________________________________ 7
Byte 4 in EEPROM__________________________________________________________________ 7
Byte 5 in EEPROM__________________________________________________________________ 8
Byte 6 in EEPROM: Track Separator Setting______________________________________________ 8
Byte 7-12 in EEPROM: Track 1 Prefix Code Setting________________________________________ 8
Byte 13-18 in EEPROM: Track 2 Prefix Code Setting_______________________________________ 8
Byte 19-24 in EEPROM: Track 3 Prefix Code Setting_______________________________________ 8
Byte 25-30 in EEPROM: Track 1 Suffix Code Setting ______________________________________ 8
Byte 31-36 in EEPROM: Track 2 Suffix Code Setting ______________________________________ 8
Byte 37-42 in EEPROM: Track 3 Suffix Code Setting ______________________________________ 8
Byte 43-45 in EEPROM: Channel A of Track 1 Setting _____________________________________ 8
Byte 47-49 in EEPROM: Channel B of Track 1 Setting______________________________________ 8
Byte 51-53 in EEPROM: Channel C of Track 1 Setting______________________________________ 8
Byte 55-57 in EEPROM: Channel A of Track 2 Setting _____________________________________ 8
Byte 59-61 in EEPROM: Channel B of Track 2 Setting______________________________________ 8
Byte 63-65 in EEPROM: Channel C of Track 2 Setting______________________________________ 8
Byte 67-69 in EEPROM: Channel A of Track 3 Setting _____________________________________ 8
Byte 71-73 in EEPROM: Channel B of Track 3 Setting______________________________________ 8
Byte 75-77 in EEPROM: Channel C of Track 3 Setting______________________________________ 8
RE1 (52h 45h 31h) － Read Configuration Status______________________________________ 8
RE2 (52h 45h 32h) － Read Prefix & Suffix Setting Status of Tracks ______________________ 9
RE3 (52h 45h 33h) － Read Channel Setting Status of Tracks ___________________________ 9
Appendix A USB Driver Installation_____________________________________ A- 1
Page
VI
Proprietary and Confidential Total 36 pages
