9
5. With the help of a second person, pivot the console as-
sembly to the position shown. Be careful to avoid pinch-
ing your hands or the wires.
Align the Handrail Bolts (102) with the holes in the tops of
t
he Uprights (93). Start all four Handrail Bolts, and then
firmly tighten them.
Console
A
ssembly
102
102
93
5
6. After the INCLINE TRAINER is placed in the location
where it will be used (see HOW TO MOVE THE IN-
CLINE TRAINER on page 11), make sure that both
Rear Feet (38) and the Base Pads (not shown) rest
firmly on the floor. If the INCLINE TRAINER rocks even
slightly, turn the right Rear Foot clockwise or counter-
clockwise until the rocking motion is eliminated.
Note: The Power Cord Bracket (64) must be at-
tached at all times.
38
64
6
7. Remove the two Cover Screws (2) and the four Front
Cover Screws (16) from the Frame (22).
16
16
2
22
7
