Main Menu
(continued)
Functions displayed during FUNCTION button operation
■
Pressing any of the [FUNCTION1] to [FUNCTION3] buttons displays the operations assigned to each
button as shown below.
HV DELAY•
DELAY OFF/H DELAY/V DELAY/
HV DELAY
BLUE ONLY•
BLUE ONLY ON/BLUE ONLY OFF
GAMMA SELECT•
GAMMA STANDARD/GAMMA FILM/
GAMMA STDIO/PST
SD ASPECT•
4:3/16:9
SCAN•
NORMAL SCAN/UNDER SCAN
SUB WINDOW•
SINGLE/FULL/PART/STILL
WFM/VECTOR•
WFM/VECTOR OFF/WFM Y ON/
WFM R ON/WFM G ON/WFM B ON/
VECTOR×1/VECTOR×2S/VECTOR×2/
VECTOR×4/VECTOR×8
MARKER•
MARKER OFF/4:3 MARKER/
13:9 MARKER/14:9 MARKER/
CNSCO2.39 MARKER/
CNSCO2.35 MARKER/
2:1 MARKER/VISTA MARKER/
95% MARKER/93% MARKER/
90% MARKER/88% MARKER/
80% MARKER/
xx% MARKER (xx % is a USER setting value of
80 % to 100 %)/MARKER ON
When the setting values of both 16:9 and 4:3 •
are set to other than OFF in the MARKER
menu settings, the setting value of 16:9 is
displayed in the first half section, and the
setting value of 4:3 is displayed in the second
half section.
PIXEL TO PIXEL•
PIXEL TO PIXEL OFF/
PIXEL TO PIXEL CENTER/
PIXEL TO PIXEL LT/
PIXEL TO PIXEL RT/
PIXEL TO PIXEL RB/
PIXEL TO PIXEL LB
PIXEL POSITION•
PIXEL TO PIXEL OFF/
PIXEL TO PIXEL CENTER/
PIXEL TO PIXEL LT/
PIXEL TO PIXEL RT/
PIXEL TO PIXEL RB/
PIXEL TO PIXEL LB
FOCUS-IN-RED•
FOCUS-IN-RED OFF/FOCUS-IN-RED ON
ZEBRA•
ZEBRA OFF/ZEBRA ON
REAR TALLY•
REAR TALLY OFF/ REAR TALLY ON
LEVEL METER•
METER OFF/METER 2CH/METER 4CH/
METER 8CH
CROSS HATCH•
CROSS HATCH HIGH/
CROSS HATCH LOW/
CROSS HATCH OFF
MONO•
MONO ON/MONO OFF
TIME CODE•
LTC/VITC/LUB/VUB/TC OFF
BLACK MODE•
BLACK MODE OFF/BLACK MODE ON
CLOSED CAPTION•
CC1/CC2/CC3/CC4/CC OFF
(SRV1/SRV2/SRV3/SRV4/SRV5/
SRV6/CC OFF)
* The displayed items differ depending on the
selection for CC TYPE.
2D ADJUST•
2D ADJUST OFF/2D ADJUST ON
<Note>
WHITE BALANCE is switched to adjustment mode
with a FUNCTION button, and the indication that
indicates the operation is not displayed.
“HV DELAY”
■
This displays the blanking period. Each press of the button changes the display as follows: H blanking
display→Vblankingdisplay→HandVblankingdisplay→noblankingdisplay.
