- 46 -
≥ Quick Start Standby Status will be unlocked after approximately
5 minutes and will switch to Standby Mode.
≥ If [ECONOMY] (l 47) is activated and the device switches to Quick
Start Standby Status automatically, pressing any button on the unit will
switch to Recording Standby Status.
≥ Depending on the recording conditions and menu settings, time for
Quick Start may be longer than 0.5 seconds.
≥ It may take some time for Automatic White Balance to adjust.
Set the type and volume of operation sounds for the unit.
Turns screen display [ON] (display) or [OFF] (not-display).
[ALERT SOUND]
[TURN ON/OFF]:
Sets the sound emitted when the unit is turned on/off. ([ON]/[OFF])
[RECORD BEEP]:
Sets the sound emitted when recording is started and stopped.
([ON]/[OFF])
[SHUTTER]:
Sets the sound emitted when the button is pressed.
([OFF]/[A]/[B]/[C]/[D])
[KEY SW]:
Sets the sound emitted when the buttons (SET button, MENU button,
etc.) are pressed. ([OFF]/[A]/[B]/[C]/[D])
[OPERATION VOL]:
Sets the volume of the operation sounds. ([1] to [7])
[ALL OFF]/[OPERATION SOUNDS ON]:
Sets all operation sounds on/off
[DISPLAY]
