35
Before You Start
Scanner panel overview
This section describes the functions of the scanner panel, illustrated below:
The scanner LCD has two 20-character lines to display the scanner’s or
duplicator’s status/error messages or the duplicator’s menu settings. When
the duplicator is ready, “Ready” with duplicate settings such as number of
copy, density setting is displayed.
The activity light indicates the status of the scanner. It has the following
meanings:
*
1
Blinking with an interval of approximately 1.7 seconds
*
2
Blinking with an interval of approximately 0.9 second
*
3
Blinking with an interval of approximately 0.7 second
This light Indicates
READY/ERROR indicator—
• The READY indicator (green)
ON: the scanner is ready for operation.
Blinking: the scanner is initializing or scanning.
• The ERROR indicator (orange)
ON: an internal error (Call for Service Error) has
occurred.
Blinking: user correctable error such as ADF jam has
occurred.
Status
READY Indicator
(green)
ERROR Indicator
(orange)
Diagnosing…/Initializing…
Blinking*
1
OFF
Ready ON OFF
Scanning
Blinking*
2
OFF
Scanning (for duplicate)
Blinking*
3
OFF
Printing (for duplicate)
Blinking*
1
OFF
User Correctable Error OFF Blinking
Call for Service Error OFF ON
LCD (Liquid
Crystal Display)
panel
INCREASE/NEXT
MODE
READY/ERROR
STOP
START
B/W
RESET
ENTER
START
COLOR
Activity light
READY/ERROR
