2.1 Control Features
User Manual 119
Check-in
The hotel operator can change the room status of extensions to check-in by using the Check-in button
assigned on his extension.
To check in
• The hotel operator must be using a 6-line display PT.
• Each DSS button light shows the current status as follows:
Off: Check-out
Red on: Check-in
• While in Room Status Control mode, the hotel operator extension is considered to be busy.
• While in Room Status Control mode, the display, INTERCOM button, and flexible buttons do
not operate for other telephone features.
• Some of the operations in this section require system programming. Consult your dealer.
• After check-in, the guest can make outgoing calls from the room extension.
• When the room status of extensions is changed, detailed room status information is recorded
automatically. This requires system programming.
<Example>
Press
Check-in
. Dial
extension number
and then press
"ENTER",
or press desired
DSS
.
OR
extension no.
(DSS)
While on-hook
ENTER
Display PT
Press
"YES"
.
Press "
EXIT"
or
Check-in
.
YES
EXIT
OR
(Check-in)
(Check-in)
Date Time Ext CO Dial Number
03:07PM
1234 Check in
02/02/00
