1.2 Making Calls
User Manual 31
1.2.3 Redial
This is convenient when calling the same outside party again.
– Last Number Redial
Last Number Redial
1.2.4 When the Dialed Line is Busy or There is No Answer
– Automatic Callback Busy
– Call Waiting
– Message Waiting
– Executive Busy Override
– Call Monitor
– DND Override
Automatic Callback Busy
You can set the telephone to receive callback ringing:
• when a dialed extension becomes idle.
• when your desired CO line that is in use by another extension becomes idle.
You cannot set Automatic Callback Busy for a busy party outside of the PBX.
When you answer the callback ringing:
• For an outside call: The line is seized.
• For an intercom call: The called extension starts ringing automatically.
• Up to 32 digits can be stored and redialed.
• After pressing REDIAL, if you hear a busy tone again, press REDIAL to retry.
• To redial automatically, press the SP-PHONE button and then the REDIAL button, or press
the REDIAL button directly. It will keep trying the busy number until the called party answers
or until a specified timeout (Automatic Redial). You can perform other tasks during dialing. To
cancel, press the FLASH/RECALL button.
Some CO lines may not support this feature.
PT/SLT/PS
Off-hook.
Press
REDIAL
or enter
#
.
REDIAL
OR
