A SERVICE OF

logo

Open as PDF
next previous
17
For assistance, please call: 1-800-272-7033
Installation
Setting up the Broadband
Networking Gateway
“
After the KX-HGC200 is inserted in the Broadband Networking Gateway,
configuration of the KX-HGC200 is required. The steps for configuration
proceed the Broadband Networking Gateway administration web screen
or Network Management web screen. The KX-HGC200 can be configured
from both a wired computer and wireless computer, but using a wired
computer is convenient.
Setting up from a wired computer
1
Access the Broadband Networking Gateway administration web
screen.
≥The default local IP address of the Broadband Networking Gateway is
192.168.0.254.
2
Click [Wireless Setup].
≥For setting up from a wired computer, follow the steps below.
≥If you can not set up from a wired computer, follow the steps
from p. 19 “Setting up from a wireless computer”.