-23-
■ Home Position Setting (HOME
POSITION)
1. To set a position number for the home position
Move the cursor to HOME POSITION and select a
desired position number with the joystick.
2. Select OFF if you are not using the home position
function.
■ Self Return Setting (SELF
RETURN)
1. Move the cursor to SELF RETURN, select a return
time from among the following with the joystick and
press the CAM (SET) key to confirm your selection.
MIN stands for minute(s).
2. Select an operation from among the following with
the joystick and press the CAM (SET) key to confirm
your selection.
■ Auto Mode Selection (AUTO
MODE)
1. To set auto mode
Move the cursor to AUTO MODE and select a mode
with the joystick. Modes change as follows:
2. When AUTO PAN is selected, set details as follows:
Move the cursor to AUTO PAN
O and press the
CAM (SET) key to display the AUTO PAN setting
menu.
3. To set a panning starting point and panning end-
point
Follow the steps below.
(1) Move the cursor to POSITION and press the
CAM (SET) key. The cursor moves to START.
(2) Move the joystick to select a panning starting
point and press the CAM (SET) key.
