Listening to your system 04
13
En
English
FrançaisDeutsch
Nederlands
Italiano Español
Making an audio recording
You can make an audio recording from any
audio source connected to the amplifier.
1 Select the source you want to record.
Use the input select buttons (INPUT
SELECTOR).
2 Prepare the source you want to record.
Tune to the radio station, load the CD, set up
the turntable, etc.
3 Prepare the recorder.
Insert a blank tape, MD, etc. into the recording
device and set the recording levels.
1
Refer to the instructions that came with the
recorder if you are unsure how to do this.
4 Start recording, then start playback of the
source component.
Note
1 The amplifier's volume, balance and tone controls have no effect on the recorded signal.
A9_MY.book Page 13 Tuesday, October 10, 2006 10:40 AM
