46
09 Advanced Setup Menu
Extend Terminal
Sets the function of the switch connected to the
EXT TERMINAL (see page 68).
1 Press and hold HOME MENU for one
second.
The screen displays the ADV. SETUP menu.
2 Use the (cursor down) button to
select EXTEND TERMINAL.
3 Use the / (cursor left/right) buttons
to select “User” then press ENTER.
• Selecting “Standard” sets the unit to
respond according to established standard
setting (see pages 68 – 70).
• When “User” is selected, the function of the
terminal switch can be set by the user.
1.
2.
3.
4.
5. ENTER
6. GROUP 1
7. GROUP 2
8. GROUP 3
PLAY
STOP
PAUSE
STEP FWD
STEP REV
SCAN FWD
SCAN REV
SKIP FWD
Extend Terminal Settings
Current New
Move Select ENTER CLEAR
HOME MENU
Delete Exit
4 Press RETURN to move from the Extend
Terminal Setting menu to the ADV.
SETUP menu.
Press HOME MENU to return from Extend
Terminal Setting menu to the idle condition.
Recording Settings
ì Selecting “Current” Settings
• Up to 30 “Current” settings can be recorded.
• Use the / (cursor up/down) buttons to
select the desired item.
1.
2.
3.
4.
5. ENTER
6. GROUP 1
7. GROUP 2
8. GROUP 3
PLAY
STOP
PAUSE
STEP FWD
STEP REV
SCAN FWD
SCAN REV
SKIP FWD
Extend Terminal Settings
Current New
Move Select ENTER CLEAR
HOME MENU
Delete Exit
ì Selecting Cursor Functions
• Eight cursor functions can be selected
• Use the /// (cursor left/right/up/
down) buttons to select then press ENTER.
Cancelation is not possible.
1.
2.
3.
4.
5. ENTER
6. GROUP 1
7. GROUP 2
8. GROUP 3
PLAY
STOP
PAUSE
STEP FWD
STEP REV
SCAN FWD
SCAN REV
SKIP FWD
Extend Terminal Settings
Current New
Move Select ENTER Exit
HOME MENU
ì Operation functions
• Up to 24 operation functions are available.
• Use the /// (cursor left/right/up/
down) buttons to select then press ENTER.
Cancelation is not possible.
1.
2.
3.
4.
5. ENTER
6. GROUP 1
7. GROUP 2
8. GROUP 3
PLAY
STOP
PAUSE
STEP FWD
STEP REV
SCAN FWD
SCAN REV
SKIP FWD
Extend Terminal Settings
Current New
Move Select ENTER Exit
HOME MENU
