49
<VRB1205>
Preparation
Basic
Operation
Setup
Other
Information
Detailed
Operation
Setup
Basic
Operation
Preparation
On CDs, Video CDs....
Program setting (Video CDs,
CDs)
Programs with a maximum of 24 steps can be memorized.
1 Press PROGRAM button.
2 Programming tracks 9, 7, and 18 in
order.
¶ Press 9, 7, +10 and 8.
3 Press ENTER button.
¶ Playback starts in the specified track order.
¶ To stop the program play, press the STOP 7 button.
Playback in a Desired Order
Programming a pause
Press the PAUSE button instead of a
number button.
¶8 appears on the screen and the pause can be
programmed.
When the wrong number button
was pressed
Press the CLEAR button, and press the
correct number button.
How to confirm, add to, or
delete programs
To confirm
Press the PROGRAM button.
¶ Programs can now be confirmed on a CD or Video CD disc.
On a DVD, select the program type with
the direction buttons 5/∞ and press the
ENTER button.
¶ Select either a 1 title program, or 2 chapter program.
¶ Programs can now be confirmed on a DVD.
Adding to a program
1 Press the PROGRAM button.
2 Press a number button, then press the
PROGRAM button.
Deleting a program
1 Press the PROGRAM button.
2 Select the program with the direction
buttons 2/3, then press the CLEAR
button.
¶ The complete program will be deleted even if the disc table
is open.
¶ Pressing the CLEAR 7 button during the stop mode will clear
all programs.
Playback in a Desired Order
(Program Play)
