Mounting Options
14 Falcon
®
4400 Series Powered Vehicle Dock
Figure 9. Installing the Vehicle Dock Assembly on the Mount
2. Loosen the Adjustment Knob slightly to tilt the Vehicle Dock to the
desired mounting angle. Re-tighten the Adjustment Knob securely.
3. Route and connect all cables (see “Power and Peripheral Device Connec-
tions” starting on page 19 for more on connections). If you haven’t
already prepared the power connection, reference “Electrical Consider-
ations” starting on page 5 for wiring information.
Inserting/Removing the 4400
Inserting the 4400 in the Dock
To insert a 4400 terminal into the Powered Vehicle Dock, perform the follow-
ing steps:
1. Slide the Falcon up under the top of the Powered Vehicle Dock.
2. Push upwards to lift the spring-loaded top to allow insertion of the Fal-
con as shown in Figure 10 on page 15.
Ram Ball
Ram Ball
Assembly
Adjustment
Knob
