4 – Managing Switches
Restoring a Switch
59022-06 A 4-27
Q
4. To restore all configuration settings, choose the Full Restore tab, then
choose the Restore button. To restore selected configuration settings,
choose the Selective Restore tab and check one or more of the following
boxes, then choose the Restore button:
Network Properties: Restores all settings presented in the Network
properties dialog except the IP address. Refer to ”Network Properties”
on page 4-21.
IP Address: Restores switch IP address in addition to the other
network properties.
Switch Properties: Restores all settings presented in the Switch
properties dialog except the domain ID. Refer to ”Switch Properties” on
page 4-16.
Domain ID: Restores switch domain ID in addition to the other switch
properties.
Port Properties: Restores all settings presented in the Port properties
dialog. Refer to ”Configuring Ports” on page 5-9.
Configured Zoning: Restores all zone sets, zones, and aliases in the
switch’s zoning database.
